LS400/LS500 Through-shaft Tension Sensor


  • High precision with temperature compensation detection
  • Low-temperature drift
  • Excellent linearity
  • Overload protection
  • Ensuring high reliability in various operating conditions
Share to

Why Choose Arise LS400/LS500  Through-shaft  Tension Sensor

The LS400/LS500 tension sensor with through-shaft design provided by Arise utilizes imported full-bridge strain gauge technology, offering high precision with temperature compensation detection. Through advanced signal processing and temperature compensation techniques, the sensor delivers exceptional accuracy, minimal temperature drift, and excellent linearity. It effectively mitigates electrostatic and frequency converter pulse interference, ensuring reliable performance in various operating conditions. Equipped with overload protection, it safeguards the sensor from damage during excessive loads. Available in ranges of 30KG, 50KG, 100KG, 200KG, and more.

Dimensional Parameters of LS400 Through-shaft  Tension Sensor

Accuracy grade 0.1
Rated characteristic value (sensitivity) 2mV/V
Combined error <1%
Principle of measurement Strain gauge full bridge
Nominal resistance of strain gauge bridge 350 Ohm
Bridge power supply voltage rating 5V
Maximum permissible value 14V
Mechanical stop 1.2~1.8xFN(Depends on types)
Operating load 1.2~1.8xFN
Ultimate load 10xFN
Target measurement stroke 0.15~0.25mm(Depends on type)
Rated temperature range +5~+55℃
Operating temerature range +5~+55℃
Protection grade IP45
Maximum allowable axial shear force 1xFN
Shaft Diameter 17mm/25mm
Weight 1.735kg

specifications of LS400 Through-shaft Tension Sensor

Dimensional Parameters of LS500 Through-shaft  Tension Sensor

Accuracy grade 0.1
Rated characteristicvalue(sensitivity) 2mV/V
Combined error <1%
Principle of measurement Strain gauge full bridge
Nominal resistance of strain gauge bridge 350 Ohm
Bridge power supply voltage rating 5V
Mechanical stop 1.2~1.8xFN(Depends  on  type)
Workload 1.2~1.8xFN(Depends  on  type)
Ultimate load 10xFN
Target measurement stroke 0.15~0.25mm(Depends  on  type)
Rated temperature range +5~+55℃
Operating temperature range +5~+55℃
Protection grade IP54
Weight 1.735kg
specifications of LS500 Through-shaft Tension Sensor