LS200 Seated Tension Sensor

  • Adopting imported full-bridge strain gauges
  • High precision detection
  • Minimal temperature drift
  • Good linearity
  • Overload protection
Share to

Advantages of LS200 Seated Tension Sensor

The LS200 seated tension sensor employs imported full-bridge strain gauges, known for their high precision and built-in temperature compensation, for detection. Through meticulous signal processing and temperature compensation, it achieves remarkable precision, minimal temperature drift, and excellent linearity. Additionally, the tension sensor effectively mitigates static electricity and group pulse interference from frequency converters. It incorporates a built-in overload limit mechanism to safeguard against sensor damage during overloads. Available in various measuring ranges, including 5KG, 10KG, 30KG, 50KG, 100KG, and 200KG.

Dimensional Parameters of LS200 Seated Tension Sensor

Accuracy grade 0.1
Rated characteristic value (sensitivity) 2 mV/V
Combined error ±0.5%
Specific value tolerances ±0.5%
Measuring principle Strain full bridge
Nominal resistance of strain gauge bridge 350 Ohm
Bridge power supply voltage Rated value 5V
Mechanical stop 1.2xFN
Workload 1.2xFN
Ultimate load 10xFN
Target measurement stroke 0.2~0.3mm(Depends on type)
Operating temperature range +5~+55℃
Protection grade IP54
Weight 0.7kg
specifications of LS200 seated tension sensor